Has 9 power phase design, so pretty good OC potential if you need it too, it's one of the better spec m-ATX boards for sure and it's only around £78. Has the AMD fan/LED port and also an extra RGB port to hook up some case LEDs etc. Has 4*SATA ports (1 of them is disabled if using the SATA m.2 port), PCI-e x16 port, and PCI-e x4 port (the PCI-e x4 port is disabled if using the m.2 NVME PCI-e x4 port). This one I have is the ASrock AB350M it's m-ATX and it has 4*RAM slots, 2*M.2 connectors that support 1*NVME/PCI-e x4 and 1*SATA/AHCI drives. I hope this cleared up some confusion.Im not looking at none in particular, but, while watching tutorials on youtube, I saw that in order to have control over the rgb lighting, you must have a software such as Asus Aura, that came in just the high end mobos with those RGB header such as the ones in the attached image, as you can tell im not that tech savy, so any orientation in this subject is highly appreciatedĪhh I see, no there are some lower end mobos that are still very good especially for the price. I can even control the colors from my MSI motherboard software. In my case, I had downloaded the wrong version of the driver software. It took me a while to figure it out, but once I had the above setup, the software worked. Each driver version is only looking for the model of cooler it is tailored for, so make sure that in your case, you download and run the WRAITH PRISM software. For instance, you cannot use Wraith Prism software with a Wraith Max cooler.

The software you use should match the model of Wraith cooler you have.

The cooler can ONLY be connected to a standard USB 2.0 header. FYI, I'm guessing the AMD USB HEADER on your motherboard is proprietary and is not compatible with this cooler.In this state, the software will not be able to communicate with the cooler. If the RGB wire is connected, the controller will default to using the RGB control and USB control will be turned off. For color control, however, ONLY the USB wire should be connected to a USB 2.0 header.

Of course, for fan control, the fan header should always be connected to the CPU fan control header on the motherboard.

There are two conditions that must be met in order for the Wraith software to work:

Amd wraith spire rgb control